Search This Supplers Products:CNC MILLING MACHINEMILLING MACHINEMACHINING CENTERCNC MACHINE CENTERMACHINE TOOLCUTTING MACHINE
SIEMENS control system tec-center is an excellent technical experience center with products experience & detailed training , which located in Nurembery.
timeFri, 17 Mar 2017 11:17:20 GMT
Please emails us your address, then most suitable travling will be recommended.
timeMon, 05 Dec 2016 13:21:23 GMT
V5,V7& V8 are new products in 2016 with direct type spindle structure.
timeMon, 05 Dec 2016 13:14:42 GMT
Sure, we can design according to your products
timeMon, 05 Dec 2016 13:10:15 GMT
About 120 sets CNC miling and 100sets conventional milling can be produced every month.
timeWed, 30 Nov 2016 13:58:05 GMT
Yes,we can.Contact us via info..........com
timeThu, 24 Nov 2016 16:16:44 GMT
Yes, both of our CNC machine and conventional machines are approved by ZOUCE CERTIFICATING AND TESTING CENTER
timeThu, 24 Nov 2016 15:00:10 GMT
Just contact us, and offer the workpiece requirements. Then the most suitable machine will be recommended by our engineers
timeThu, 24 Nov 2016 14:47:55 GMT
The machine can works properly from 0℃ to 40℃
timeThu, 24 Nov 2016 14:25:11 GMT
ADD: West Huancheng Road, Huizhou District, Huangshan City, Anhui Province, China
timeFri, 23 Sep 2016 13:21:43 GMT
1.Check the air pressure which should be higher than 0.6MPa2.Check the oil cup of tool unclamping cylinder, and and oil if need. Confirm whether there is air leakage or not.3.Adjust the clearence of air cylinder, usually spinlde press the tool 0.6 to 0.8 mm.
timeThu, 22 Sep 2016 15:32:27 GMT
SINO is a brand under WANNAN company. It focus on high level machining center. It is also a brand for all export machines.
timeTue, 21 Jul 2015 18:26:58 GMT
Normally we don't offer such service because we cannot guarantee the quality of tools. Unless you can send us the brand and also model.
timeTue, 21 Jul 2015 18:25:28 GMT
Besides inspectors on each processing and assembly line, after finishing assembly, we use RENISHAW laser interferometer to test the accuracy.
timeTue, 21 Jul 2015 18:23:40 GMT
Which country are you from? Kindly contact me through email wannanmachine..........comTo be exclusive agent, you need to guarantee a certain trade capacity for one year. So at the beginning of our cooperation, I don't suggest that.
timeTue, 21 Jul 2015 18:20:56 GMT
From Shanghai to our city, there is bullet train which will take 4 hours. And also you can choose airplane, it will only tale one hour.
timeTue, 21 Jul 2015 18:18:49 GMT
Yes, we have Chinese brand rotary table and also TAIWAN brand for your choose.Also you can choose just keep the function for 4 axis but don't offer rotary table.
timeTue, 21 Jul 2015 18:13:04 GMT
The major machine components apply finest gray cast iron which are of good shock resistance. All the casts have been done withaging treatment twice, in order to eliminate the internal residual stresses. Sothat, our machine can work with high rigidity and good shock resistance forheavy cutting and intermittent cutting.
timeTue, 21 Jul 2015 18:10:43 GMT
Yes, we have. Kindly send me email wannanmachine..........com and I will send details to you. It is a good idea to see machine firstly before ordering.
timeTue, 21 Jul 2015 18:04:30 GMT
Sure. We can offer training in our workshop for free. Also if you need, we can also send our engineer to your company.
timeTue, 21 Jul 2015 18:03:00 GMT
Kindly send details to email wannanmachine..........com.The email should include machine model, quantity, trade term and any accessories etc. Thanks!
timeTue, 21 Jul 2015 18:01:03 GMT
1. For CNC knee-type milling machines, definitely we recommend Chinese brand CNC system GSK which can bring much better cost on whole machine but similar process ability.2. For machining centers, we can install system in following brands: GSK, FANUC, SIEMENS, MITSUBISHI.
timeTue, 21 Jul 2015 17:58:00 GMT
We accept T/T and Letter of Credit.
timeTue, 21 Jul 2015 17:35:19 GMT
We export machines since 1995. Now our machines reached North America, South America, East Eupropean countries, Middle East etc.
timeTue, 21 Jul 2015 17:31:12 GMT
Size is different based on the machine you need. But all of our conventional knee-type milling machine can be fit into standard container.
timeTue, 21 Jul 2015 17:27:43 GMT
The main functional parts in our machine are from TAIWAN or Japan, so machine stablity will keep the same with TAIWAN machines. But we have much more competitive price. Welcome to send enquiry to us.
timeTue, 21 Jul 2015 17:24:33 GMT
According to our stock, sometime you can get machines just directly from stock.If not, only need one month for standard machines.
timeTue, 21 Jul 2015 17:12:34 GMT
Absolutely. We can do based on your authorization.
timeTue, 21 Jul 2015 16:33:27 GMT
We will offer one year warranty after shipment.
timeTue, 21 Jul 2015 16:32:26 GMT
1. WANNAN has 87 years experience in machining. 2. WANNAN covers an area of 236,000 square meters. 3. WANNAN has more than 120 technician people, among which we have presale service team, commissioning team and after sale service team.4. WANNAN has input hundreds millions to import processing machines from TAIWAN to ensure casting processing accuracy.
timeTue, 21 Jul 2015 16:31:10 GMT
Milling is the machining process of using rotary cutters to remove material from a workpiece advancing in a direction at an angle with the axis of the tool. It covers a wide variety of different operations and machines, on scales from small individual parts to large, heavy-duty gang milling operations. It is one of the most commonly used processes in industry and machine shops today for machining ...
timeTue, 21 Jul 2015 10:44:04 GMT
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.